Jet CS-315 315mm Ferrous Manual Cold Saw (414227)

Description

The Jet CS-315 315mm Ferrous Manual Cold Saw (414227) is a powerful manual cold saw designed for clean, burr-free cutting of ferrous metals. Its heavy-duty cast iron frame ensures stability during operation, while the two-piece cast iron blade guard system allows for quick and easy blade changes without removing the guards.

KEY FEATURES AND BENEFITS:

• Powerful Cutting Performance: 2 HP motor delivers smooth cutting through solid and tubular materials up to 3.5 inches in diameter.
• Mitering Versatility: Cuts at angles up to 135 degrees for precise mitered cuts.
• Durable Construction: Heavy-duty cast iron base and head provide long-lasting performance.
• Extended Blade Life: Integral coolant system with a 1.5-gallon reservoir and flow control system cools the blade and extends its lifespan.
• Precise Cutting Control: Quick clamping vise with adjustable gib and material support bar ensures accurate cuts.
• Two Speed Options: Choose between 52 RPM and 104 RPM for optimal cutting speed based on material.

SPECIFICATIONS:

• Motor: 2 HP, 230V, 3-Phase
• Blade Size: 12″ diameter (315mm x 32mm x 2mm)
• Maximum Vise Opening: 4.7 inches
• Cutting Capacity (Solid):
• Round: 3.5″ (90°) / 3.5″ (45°)
• Square: 3.25″ x 3.25″ (90°) / 3.125″ x 3.125″ (45°)
• Rectangle: 4″ x 3.2″ (90°) / 2.6″ x 3.2″ (45°)
• Cutting Capacity (Tubing):
• Round: 3.5″ (90°) / 3.5″ (45°)
• Square: 3.25″ x 3.25″ (90°) / 3.125″ x 3.125″ (45°)
• Rectangle: 4″ x 3.2″ (90°) / 2.6″ x 3.2″ (45°)
• Overall Dimensions: 40″ x 40″ x 72″ (L x W x H)
• Weight: 420 lbs

HOW TO USE:

1. Secure the Material: Clamp the material firmly in the vise, ensuring it is properly aligned for the desired cut.
2. Adjust Miter Angle (Optional): If a mitered cut is needed, loosen the miter lock, adjust the cutting head to the desired angle using the miter gauge, and then retighten the lock.
3. Lower the Saw Head: Slowly lower the saw head using the handle until the blade makes contact with the material.
4. Start the Saw and Make the Cut: Turn on the saw and apply steady, even pressure as you guide the saw head through the material to complete the cut.
5. Turn Off and Raise Saw Head: Once the cut is complete, turn off the saw and raise the saw head to its starting position.

BENEFITS OF USING Jet CS-315 315mm Ferrous Manual Cold Saw (414227):

• Efficient Metal Cutting: Cut through ferrous metals quickly and cleanly with minimal effort.
• Precise Cuts: Durable construction and adjustable features ensure accurate and repeatable cuts.
• Long Blade Life: Integrated coolant system extends blade life, reducing replacement costs.
• Mitering Capability: Perform mitered cuts at various angles for complex projects.
• Heavy-Duty Construction: Built to last with a cast iron frame and head for demanding applications.

FEATURES:

• Two-piece cast iron blade guard system for easy blade changes
• Quick clamping cam-action vise with adjustable gib and material support bar
• Hardened and ground direct drive worm shaft and bronze worm wheel for maximum torque transfer
• Blade drive reduction gearbox operating in an oil bath for increased durability
• Flood coolant system with a 1-1/3 gallon coolant reservoir and pump with flow control system
• Quick tension and release mitering capabilities with stops at 45° right and left
• Fully adjustable material depth stop for sawing repeatability