Description
Cool Blocks are made of composite phenolic resin impregnated with graphite. They set closer to your blade than metal guide blocks giving a more stable and accurately guided cut. Cool Blocks eliminate friction and heat caused by metal to metal contact so blades will run smoother, cooler and far quieter than with metal block guides. Cool Blocks also help to extend the life of your bandsaw blades.
Cool Block Selection
Please check the shape and size of your existing guide blocks and compare them to the chart below to make sure you get the correct Cool Blocks for your bandsaw. If you are unsure, please call us.
Please Note: Cool Blocks are made to replace the
original metal guide blocks which came with many older bandsaws. Cool Blocks are NOT designed to replace roller bearing blade guides.
| HW # | Model # | Fits These Saws | Block | |
|---|---|---|---|---|
| 486001 | CB50000BL | Delta 14″ Most models |
Three blocks 1/2″ x 1/2″ x 7/8″ One beveled block |
|
| 486002 | CB50010BL | Sears 12″ Tilting Table (NOT the Sears 12″ Tilting HEAD Bandsaw) Skil HD3640 10″ Dremel 1120 10″ |
Four blocks 3/8″ x 3/8″ x 3/4″ |
|
| 486004 | CB50030BL | Shopsmith 11″ | Two blocks 3/8″ x 3/8″ x 7/8″ with bevel Two blocks |
|
| 486005 | CB50050BL | Most (non-Delta) 14″ saws including Sears Craftsman, Grizzly, Jet, Ridgid, Steel City 50125 |
Four blocks 1/2″ x 1/2″ x 3/4″ |
|
| 486006 | CB50040BL | Old Sears Bandsaws | Four blocks 1/4″ round x 7/8″ |
|
| 486009 | CB50070BL | Jet 12″, Delta 28-140 10″, Delta 28-190 12″ & Delta 28-560 16″ 3-wheel saw |
Four blocks 5/16″ x 5/16″ x 7/8″ |
|
| 486010 | CB50080BL | Most 56-1/8″ blade saws Delta 28-180 & 28-185″ 8″ 8″ 2-wheel saws from 10″ 3-wheel saws |
Four blocks 3/16″ round x 7/8″ |
|
| 486014 | CB50055BL | 14″, 16″ & 18″ Import Bandsaws |
Four blocks 12 mm (.472″) round x 7/8″ |
|
| 158005 | CB50085BL | 9″ 2-wheel saws from Ryobi, Sears Craftsman, Black & Decker, ProTech, Trademaster & Collins |
Two blocks 13/64″ x 13/64″ x 13/16″ Two blocks |
|
| 486099 | CB-SLAB | Custom Cut and shape to fit your needs |
One block 6″ x 1-3/4″ x 1/2″ |
Additional Information
This guide to fitting Cool Blocks shows the blocks’ actual size, when printed on a full 8-1/2″ x 11″ sheet.
Cool Blocks Installation Guide
Reviews
There are no reviews yet.