Description

5175321 D4-9X Package DANNMAR 9K Capacity 4-Post / High Rise Ext. Length / Incl. Caster Kit, Drip Trays and Alu. Ramps

If your vehicle has a longer wheelbase such as a long bed or crew cab truck, you might want to consider the Dannmar D4-9X. The runway length is 198” so it will easily accommodate a long wheelbase, plus it’s rated to lift 9,000 lbs. The dimensions of this lift make it about two feet longer than most other four post lifts.

Features

CE Approved and Certified
Meets or exceeds the standards prescribed by European Standard EN-1493
Mid to long-style approach ramps for low-ground clearance vehicles
Runways include rail-kit for optional accessories
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Pneumatic push-button safety release
Heavy-duty 1/2” aircraft cable and 1.75” roller axles
Safety locks enclosed in columns minimize pinch points
Oversized sheave diameter reduces cable fatigue
Large self-lubricating cable rollers
Multi-position safety locks in each column
Customizable power unit location
Approach ramps incorporate built-in rear-wheel chocks
Independent backup slack-cable safety latches
Runways feature non-skid surface
Optional drive-thru ramps available
Optional drip trays available
Optional 6,000-lb. capacity rolling jacks available to raise front or rear of vehicle
ETL approved

Lifting Capacity	9,000 lbs. (4,082 kg)
A – Min. Runway Height	5” (127 mm)
B – Max. Rise	82” (2,083 mm)
C – Max. Lifting Height	87” (2,210 mm)
D – Height of Columns	99” (2,515 mm)
E – Drive-Thru Clearance	86” (2,184 mm)
F – Overall Width	114.5” (2,908 mm)
G – Width Between Columns	98” (2,489 mm)
H – Overall Length	227” (5,766 mm)
I – Outside Length	200.5” (5,093 mm)
J – Width Between Runways	37.5” (953 mm)
K – Runway Centerline	53.75” (1,365 mm)
L – Outside Edge of Runways	72.5” (1,842 mm)
M – Runway Width	18.75” (476 mm)
N – Length of Runways	189.75” (4,820 mm)
Min. Wheelbase @ Rated Capacity	135” (3,429 mm)
Min. Wheelbase @ 75% Capacity	115” (2,921 mm)
Min. Wheelbase @ 50% Capacity	95” (2,413 mm)
Min. Wheelbase @ 25% Capacity	80” (2,032 mm)
Locking Positions	16 (spaced every 4” / 102 mm)
Time to Full Rise	60 seconds
Motor	110VAC, 50-60HZ, 1PH, 20A or 208-230VAC, 50-60HZ, 1PH, 25A
Shipping Weight	2,420 lbs. (1,097.7 kgs)
Shipping Dimensions	189″ x 22″ x 41″ (4,800 mm x 558 mm x 1,041 mm)