Wagner Meters RapidRH Easy Reader (°C) (860-R0040-004)

Description

The Wagner Meters RapidRH Easy Reader (°C) (860-R0040-004) is a portable and user-friendly device designed for quickly and repeatedly obtaining relative humidity (RH) and temperature measurements from RapidRH® Smart Sensors. This instrument is essential for professionals involved in concrete moisture testing, providing immediate and reliable data to assess concrete dryness. Its intuitive design and advanced technology streamline the process of collecting crucial environmental information directly from within the concrete slab.

KEY FEATURES AND BENEFITS:

• Rapid Readings with Touch-n-Sense™ Technology: Allows for instant display of measurements as soon as the reader makes contact with a RapidRH® Smart Sensor, eliminating delays and speeding up data collection.
• Dual Measurement Display: The integrated LCD screen clearly displays both the relative humidity (RH) as a percentage and the temperature in Celsius (°C), providing all necessary environmental data at a glance.
• Automatic Data Hold: Measured values are held on the display for a full five minutes after removal from the Smart Sensor, allowing ample time to record readings accurately.
• Power Conservation: Automatically shuts off after five minutes of inactivity or when inserted into a new Smart Sensor, ensuring the device is ready for use when needed.
• Job Site Ready: Built with durability in mind to withstand typical conditions encountered on construction sites.
• Simplified Operation: Requires no manual calibration, reducing setup time and potential errors, allowing users to focus on the testing process.

SPECIFICATIONS:

• Measurement Type: Relative Humidity (RH %) and Temperature (°C)
• Temperature Range: Approximately -1°C to 43°C
• Humidity Range: 0% to 100% Relative Humidity
• Accuracy: Typically +/- 2% RH (determined by the RapidRH® Smart Sensors)
• Power Source: Two AAAA batteries (included)
• Automatic Shut-Off: 5 minutes after removal from the Smart Sensor or upon insertion into a new sensor
• Dimensions: Approximately 4 9/16” (Length) x 2 ¾” (Height) x 1 1/16” (Width)
• Weight: Approximately 0.37 lbs
• Compatibility: Designed for use with RapidRH® Smart Sensors

HOW TO USE:

• Prepare the Smart Sensor: Ensure a RapidRH® Smart Sensor is properly installed in the concrete test hole according to the manufacturer’s instructions.
• Power On: The Easy Reader will automatically power on when it makes contact with a Smart Sensor.
• Insert the Reader: Carefully insert the probe end of the RapidRH™ Easy Reader into the installed Smart Sensor.
• View Readings: The LCD display will immediately show the relative humidity (%) and temperature (°C) readings.
• Hold Feature: Once removed from the Smart Sensor, the readings will remain on the display for five minutes.
• Record Data: Take this time to note down the displayed RH and temperature values.
• Automatic Shut-Off: The device will turn off after five minutes if not inserted into another Smart Sensor.
• Repeat as Needed: Repeat steps 2-7 to take readings from other installed Smart Sensors.

BENEFITS OF USING THE WAGNER METERS RAPIDRH EASY READER (°C) (860-R0040-004):

• Time Savings: Touch-n-Sense™ technology significantly reduces the time required to obtain readings compared to traditional methods.
• Increased Efficiency: Quickly move between multiple Smart Sensors to obtain instant data, streamlining the testing process.
• Accurate and Reliable Data: Provides dependable measurements crucial for making informed decisions about flooring installation timelines.
• User-Friendly Operation: Simple interface and automatic features make the device easy to use, even for those with limited experience in moisture testing.
• Reduced Errors: The automatic hold feature minimizes transcription errors by providing ample time to record data.
• Long Battery Life: Automatic shut-off conserves battery power, ensuring the device is ready for use without frequent battery changes.

FEATURES:

• Instant Measurement Display: Provides immediate RH and temperature readings upon contact with the Smart Sensor.
• Celsius Temperature Display: Specifically designed to show temperature readings in degrees Celsius.
• Automatic Reading Hold: Retains the measurement on the screen for five minutes after removal.
• Self-Powered: Operates on readily available AAAA batteries.
• Robust Construction: Built to withstand the demands of construction environments.
• No Manual Calibration Required: Simplifies use and reduces maintenance needs.
• Compact and Portable: Easy to carry and use on various job sites.
• Clear LCD Screen: Ensures readings are easily visible in different lighting conditions.