Speedhut 2-1/16″ 30inhg-0-30 Boost/Vac Gauge w/ Warning (R2-BV4-DATZ)

Description

The Speedhut 2-1/16″ 30inhg-0-30 Boost/Vac Gauge w/ Warning (R2-BV4-DATZ) is an essential instrument for closely observing the pressure levels within your vehicle’s engine. Designed for both turbocharged and naturally aspirated systems, this gauge provides accurate, real-time readings of boost and vacuum, allowing you to maintain optimal engine performance and diagnose potential issues. Its straightforward installation and integrated warning light make it a valuable addition to any vehicle where monitoring intake manifold pressure is critical.

KEY FEATURES AND BENEFITS:

• Provides precise measurement: Measures both vacuum (up to 30 inHg) and boost pressure (up to 30 PSI).
• Settable warning light: Alerts the driver when pressure levels exceed or fall below predefined thresholds.
• Reliable sensor: Utilizes a high-quality 3-Wire Military Grade Transducer for accurate readings.
• Compact size: 2-1/16 inch (52mm) diameter fits standard gauge pods.
• Simple installation: Comes with mounting hardware for easy setup.
• Crucial performance monitor: Essential for forced induction system diagnostics.
• Versatile use: Suitable for a wide range of vehicles and engine types.

SPECIFICATIONS:

• Gauge Type: Boost/Vacuum Gauge
• Pressure Sender Type: 3-Wire Military Grade Transducer (Performance)
• Range: 30 inHg – 0 – 30 PSI
• Size: 2 1/16 inch (52mm)
• Hole Size: 2.062 inches (52mm)
• Standard or Metric: Standard
• Warning Light: Yes
• Ships With:
• Boost/Vac Hose Kit
• Pressure Sensor – 30 psi
• 3 ft Power & Lighting Harness – for LED Lit Gauges and Clocks
• Pressure Gauge Wiring Harness (3-Wire Cable)

HOW TO USE:

1. Mount the Gauge: Locate a suitable 2-1/16 inch (52mm) opening in your vehicle’s dashboard or gauge pod. Secure the gauge using the provided mounting spin ring.
2. Install the Pressure Sensor: Identify a suitable location on your engine’s intake manifold to tap into a pressure/vacuum source. Install the included pressure sensor at this location.
3. Connect the Hoses: Attach the provided boost/vac hose to the pressure sensor and then route it to the back of the gauge, connecting it to the appropriate port.
4. Wire the Power and Lighting: Connect the 3 ft Power & Lighting Harness to a suitable 12V power source in your vehicle. This harness also powers the gauge’s internal lighting.
5. Connect the Sensor Wiring: Use the Pressure Gauge Wiring Harness (3-Wire Cable) to connect the pressure sensor to the corresponding terminals on the back of the gauge. Ensure a secure connection.
6. Set the Warning Light (Optional): Follow the gauge’s specific instructions to set the desired pressure threshold for the warning light to activate.
7. Verify Operation: Start your vehicle and observe the gauge readings to ensure proper function. Check that the warning light activates as expected when the set pressure is reached.

BENEFITS OF USING THE SPEEDHUT 2-1/16″ 30INHG-0-30 BOOST/VAC GAUGE W/ WARNING (R2-BV4-DATZ):

• Accurate Monitoring: Provides precise real-time information about your engine’s boost and vacuum levels, crucial for performance tuning and diagnostics.
• Early Problem Detection: Allows you to identify potential engine issues, such as leaks or malfunctions in the forced induction system, before they become severe.
• Performance Optimization: Enables you to monitor the effects of modifications and adjustments made to your engine, helping you achieve optimal performance and efficiency.
• Enhanced Safety: The integrated warning light provides an immediate visual alert if critical pressure levels are reached, helping to prevent potential engine damage.
• Easy Installation: Designed for straightforward installation in most vehicles with a standard 2-1/16 inch gauge opening.
• Reliable Readings: The use of a military-grade pressure transducer ensures consistent and accurate measurements.

FEATURES:

• Displays vacuum levels from 30 inches of mercury (inHg) to 0.
• Indicates boost pressure from 0 to 30 pounds per square inch (PSI).
• Equipped with a user-configurable warning light for critical pressure alerts.
• Utilizes a robust 3-wire pressure sensor for precise data acquisition.
• Designed in a standard 2-1/16 inch (52mm) size for universal fitment in compatible gauge pods.
• Employs standard units of measurement (inHg and PSI) for easy understanding.
• Includes all necessary hoses and wiring for a complete installation.