Phoenix USA 99-02 Ford F350 2WD/4WD DOT Style Sim Set (GDF17)

Description

The Phoenix USA 99-02 Ford F350 2WD/4WD DOT Style Sim Set (GDF17) offers a straightforward and effective way to elevate the visual appeal of your 1999-2002 Ford F350 or F-350 Super Duty dual rear wheel truck. This complete set of four wheel simulators is constructed from polished stainless steel, providing a bright and lasting finish that mimics the look of high-end aluminum wheels. Designed for easy installation, this kit includes everything needed to transform the appearance of your vehicle without the need for complex modifications.

KEY FEATURES AND BENEFITS:

• Vehicle Compatibility: Specifically engineered for 1999-2002 Ford F350 and F-350 Super Duty models with dual rear wheels, in both 2WD and 4WD configurations.
• Enhanced Aesthetics: Instantly upgrades the look of your truck, providing the stylish appearance of expensive custom wheels.
• DOT Approved: Meets Department of Transportation standards, ensuring safety and compliance.
• Polished Stainless Steel Construction: Made from high-quality T304L stainless steel for exceptional resistance to rust and corrosion, ensuring long-term durability and a consistently polished appearance.
• Easy Bolt-On Installation: Designed for a simple, do-it-yourself installation process that doesn’t require removal of the original lug nuts.
• Complete Kit: Includes two front wheel simulators, two rear wheel simulators, and all necessary mounting hardware for a full vehicle transformation.
• Front Wheel Access: Front simulators feature pop-out center caps, providing convenient access to manual locking hubs on 4WD models.
• Designed for 16-Inch Wheels: Precisely manufactured to fit 16-inch diameter wheels that are 6 inches wide with an 8-lug, 170mm bolt circle and compatibility with 9/16″ or 14mm-2.00 lug studs.
• Protective Design: Features a rolled edge for added strength and improved handling safety during installation and removal.

SPECIFICATIONS:

• Product Name: Phoenix USA Inc DOT Style Bolt On Wheel Simulator Kit
• Product Code: GDF17
• Vehicle Fitment: 1999-2002 Ford F350 (2WD/4WD), 1999-2002 Ford F-350 Super Duty
• Wheel Configuration: Dual Rear Wheel (Dually)
• Wheel Size Compatibility: 16-inch diameter, 6-inch width
• Lug Pattern: 8 Lug on 170mm Bolt Circle
• Lug Stud Compatibility: 9/16″ and 14mm-2.00
• Material: T304L Polished Stainless Steel
• Style: DOT Over-Lug, Bolt-On, Stud Mount
• Hand Holes: 4
• Front Simulator Design: Dishes Out with Pop-Out Center
• Rear Simulator Design: Deeply Dished
• Included in Kit: 2 Front Wheel Simulators, 2 Rear Wheel Simulators, Mounting Hardware, Installation Tool, Instruction Sheet
• Approximate Kit Weight: 13 – 15.95 lbs (depending on source)

HOW TO USE:

1. Preparation: Ensure your Ford F350 or F-350 Super Duty is parked on a level surface with the parking brake engaged.
2. Identify Components: Familiarize yourself with the front and rear wheel simulators and the provided mounting hardware. The front simulators will typically have a flatter profile and a pop-out center cap.
3. Position the Simulator (Front): Align the front wheel simulator over your existing wheel, ensuring the lug studs pass through the corresponding holes on the simulator.
4. Install Mounting Hardware (Front): Using the provided hardware (likely including clamps and nuts), secure the simulator to the wheel by tightening the hardware evenly. The exact method may vary slightly depending on the specific hardware included, so refer to the instruction sheet.
5. Position the Simulator (Rear – Outer): Align the outer rear wheel simulator over the existing outer wheel, ensuring the lug studs pass through the corresponding holes.
6. Install Mounting Hardware (Rear – Outer): Secure the outer rear simulator using the provided hardware, tightening evenly.
7. Position the Simulator (Rear – Inner): The inner rear wheel typically does not have a simulator in this type of kit. The outer simulator is designed to cover both wheels visually.
8. Final Check: Once all simulators are installed and the mounting hardware is securely tightened, double-check that each simulator is firmly attached and does not wobble. Ensure the front center caps are properly in place or can be easily removed if needed for 4WD hub access.
9. Refer to Instructions: Always consult the specific installation instructions included with your Phoenix USA GDF17 kit for the most accurate and detailed steps.

BENEFITS OF USING THE PHOENIX USA 99-02 FORD F350 2WD/4WD DOT STYLE SIM SET (GDF17):

• Cost-Effective Upgrade: Achieves the appearance of custom alloy wheels at a fraction of the cost.
• Simple Installation: Allows for a quick and easy transformation of your vehicle’s look without professional help or specialized tools.
• Maintains Vehicle Integrity: Does not require any permanent modifications to your truck, preserving the original chassis and warranty.
• Enhanced Resale Value (Potential): A well-maintained and visually appealing vehicle can often attract more potential buyers.
• Improved Aesthetics: Significantly enhances the overall style and road presence of your Ford F350 or F-350 Super Duty.
• Durable and Long-Lasting: The polished stainless steel construction ensures resistance to the elements and maintains its shine over time.
• Easy Maintenance: The smooth stainless steel surface is easy to clean and maintain.
• DOT Compliance: Provides peace of mind knowing the product meets safety regulations.

FEATURES:

• Constructed from non-corrosive T304L stainless steel for lasting shine.
• Over-lug design allows for installation without removing factory lug nuts.
• Specifically contoured for the dual rear wheel setup of the Ford F350.
• Front simulators include removable center caps for 4WD manual hub access.
• Features four strategically placed hand holes for easier handling during installation and removal.
• Designed to fit standard 16-inch, 8-lug dually wheels with a 170mm bolt circle.
• Includes all essential mounting components for a secure and hassle-free attachment.
• Offers a smooth, polished surface that is easy to clean and maintain.
• Provides a substantial visual upgrade to the vehicle’s exterior.
• Protective rolled edges contribute to the product’s strength and user safety.