PIG® Drive-Over Build-A-Berm® Barrier Vented 90° Corner

Description

Drive-over barrier springs back into shape when heavy vehicles, carts, dollies and pallet jacks pass. Custom containment berm helps you control liquids in high-traffic areas.

• The Drive-Over Barrier provides semi-permanent containment in high-traffic areas on concrete, asphalt or most sealed surfaces
• Constructed of 40-ounce, vinyl-coated fabric with an open-cell foam core; berm compresses to approximately 1/4″ when driven over; springs back to shape when vehicles pass
• 1.5″ height accommodates low-clearance traffic like pallet jacks, heavy carts and dollies; durable enough to withstand indoor or outdoor traffic from trucks, loaded tow motors and other heavy vehicles
• Secure to floor with sealant (sold separately) and reinforce with predrilled aluminum mounting strips (included) and steel anchors (included); seal seams with vinyl cement (sold separately)
• Create any configuration by combining with other Build-A-Berm components; ends overlap and can be sealed together for liquid-proof containment
• When used with standard high-visibility yellow Build-A-Berm Barriers, orange color indicates area where drivers can enter and exit
• Vent allows built-up air pressure caused by heavy vehicles driving over connected heavy-duty sections to escape without rupturing the seams of your barrier
• Join two 1.5″-high Drive-Over Build-A-Berm straight sections at a 90-degree angle (sold separately)