Description
Year: 2018.
Serial Number:PM-040-18-CMJ-6-8.
The CMJ is a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. The CMJ is manually operated with (2) counter rotating vertical spindles. One spindle clears the leading edge of the rail with the other spindle then moving in and processing the remainder of the components width. The CMJ will provide a clean, tear-out free, end coped/tenoned part every time!.
** This used machine comes with tooling for end matching flooring, V Groove paneling, and a phase converter.
CMJ MATERIAL SPECIFICATIONS
– 1/2″ Minimum to 1″ Maximum Thickness
– 3″ Minimum to Unlimited Maximum Length
– 1 1/2″ Minimum to 8″ Maximum Width (12″ optional)
Note: Custom needs can be addressed.
CMJ SPECIFICATIONS
– (1) work zone
– 1/2″ thick machined aluminum work surface
– (1) 5Hp Motor
– 208/230V 3 Phase
– (2) counter rotating belt driven vertical spindles
– 7,000RPM spindle speed
– 1 1/4″ spindle shaft diameter(DM)
– 5″ Maximum cutterhead diameter(DM)
– 1 1/4″ maximum tool body thickness
– 5/8″ maximum depth of cut
– X-Axis movement pneumatically controlled
– Y-Axis(depth of cut) is manual adjustable thru placement of the material stop. Intention is to set once
and let remain. Range of movement is 3/8″ to 5/8″.
– Left hand spindle fixed position
– Right hand spindle adjustable for alignment purposes
– 1/2″ Minimum material thickness
– 1″ Maximum material thickness (increase thickness optional)
– 3″ Minimum part length (estimated. will vary with max. tool diameter)
– Unlimited Maximum part length
– 8″ Maximum part width (12″ Optional)
– Pneumatically controlled Bar clamp to secure entire width of component
– (2) 4″ diameter(DM) dust ports
– Square rail bearings
– 1,600 lbs weight
– 52″ L x 33″ W x 52″ H dimensions
– 208-230 V 3 Phase Power
– 5 CFM air requirements
– Estimated cycle time of 6 seconds
Note: Custom needs can be addressed.
Reviews
There are no reviews yet.