Sharpe 1.5mm Nozzle HVLP FX3000 Spray Gun (288881)

Description

The Sharpe 1.5mm Nozzle HVLP FX3000 Spray Gun (288881) is a professional-grade tool engineered to deliver superior finishes on large-scale automotive and industrial painting projects. This full-size, gravity-fed spray gun utilizes High Volume, Low Pressure (HVLP) technology to provide exceptional material transfer efficiency, significantly reducing paint waste and overspray. The 1.5mm nozzle is specifically designed for applying a wide range of medium to high-viscosity coatings, including base coats, enamels, sealers, and clear coats, ensuring a smooth and consistent finish every time. Its ergonomic and lightweight design minimizes user fatigue, while the straightforward assembly and reduced number of parts make cleaning and maintenance a simple task. Whether you are a professional painter or a dedicated enthusiast, the Sharpe FX3000 offers a balance of performance, efficiency, and comfort to help you achieve professional-quality results with ease.

KEY FEATURES AND BENEFITS:

• High Material Transfer Efficiency: The HVLP technology allows for greater atomization and less overspray, meaning more material reaches the surface and less is wasted, saving you money on coatings.
• Versatile Application: The 1.5mm nozzle is a versatile choice, making this gun suitable for a broad spectrum of materials, from base coats to high-viscosity clear coats, making it a valuable tool for various projects.
• Ergonomic and Lightweight Design: At just 1.1 lb, the gun is well-balanced and comfortable to hold, which reduces user fatigue during extended use.
• Reduced Maintenance: With 29% fewer parts than previous models, the gun is easier to disassemble, clean, and maintain, ensuring it stays in optimal working condition.
• Gravity-Fed System: The gravity-fed design provides a consistent flow of material, which is ideal for a variety of paint consistencies and helps prevent clogging.

SPECIFICATIONS:

• Part Number: 288881
• Spray Gun Type: HVLP (High Volume, Low Pressure)
• Feed Type: Gravity Feed
• Nozzle Size: 1.5 mm
• Cup Size: 20 oz (600 cc) aluminum cup
• Maximum HVLP Inlet Pressure: 29 psi (0.2 MPa, 2.0 bar)
• Pattern Size: Up to 12.5 inches (31.75 cm)
• Weight (with cup): 1.1 lb (0.5 kg)
• Included in the box: Sharpe 1.5mm Nozzle HVLP FX3000 Spray Gun, 20 oz aluminum cup, wrench, and cleaning brush.

HOW TO USE:

1. Preparation: Before use, ensure the gun is clean. Secure the 20 oz aluminum cup to the gun body and fill it with your prepared paint or coating.
2. Air Connection: Connect the air hose to the air inlet at the base of the gun. Set your air compressor to provide 29 psi at the gun’s inlet.
3. Adjustments: Use the fluid adjustment knob to control the amount of paint flow and the fan pattern knob to adjust the width of the spray pattern. A wider pattern is good for large, flat surfaces, while a narrower pattern works for smaller areas.
4. Testing: Before spraying your final surface, test the spray pattern on a scrap piece of cardboard or wood. Make any necessary adjustments to the air pressure or fluid controls.
5. Spraying: Hold the gun perpendicular to the surface, maintaining a consistent distance of about 6 to 8 inches. Pull the trigger to begin spraying and move the gun in smooth, overlapping passes to ensure even coverage. Release the trigger at the end of each pass.
6. Cleaning: After each use, disconnect the air supply, empty any remaining material from the cup, and flush the gun with the appropriate cleaning solvent until it runs clear.

BENEFITS OF USING SHARPE 1.5MM NOZZLE HVLP FX3000 SPRAY GUN (288881):

• Professional Finish: The HVLP technology and precise nozzle provide a fine, consistent atomization that results in a smooth, professional-quality finish with minimal texture.
• Paint Efficiency: The high material transfer rate significantly reduces wasted paint, leading to cost savings on expensive coatings.
• Versatility: This gun is an all-around performer, suitable for a variety of applications from automotive base coats to furniture enamels and industrial sealers.
• Comfortable Operation: The lightweight and ergonomic design reduces stress on the user’s hand and wrist, allowing for longer, more comfortable painting sessions.
• Easy to Maintain: The simplified design with fewer parts makes the gun easier to clean and service, saving you time and effort in the long run.

FEATURES:

• Black Nickel finish for a professional look.
• Made with durable materials, including aluminum and stainless steel fluid passages.
• Low trigger pull, engineered for a comfortable user experience.
• Designed with an air consumption rate of 9.5 SCFM at 29 psi for efficient operation.
• Compatible with a range of optional accessories, including 3M PPS adapters.