Description
Pègas designed these blades specifically for use removing dovetail waste with a fret saw. It has center-aligned reverse teeth. You’ll get a clean cut on both sides of the wood because both sides are “entry cuts”. Tooth spacing is optimized to remove waste efficiently while maintaining a clean cut. They fade at the ends of the blade to make starting easier in hard, difficult woods. The blades are thin enough to drop into the thinnest kerf, even those cut by Japanese dozuki saws.
Use #5 blades for stock up to 3/4″ thick. Use #9 blades for stock 3/4″ and thicker.
| Size | Thickness | Width | Length | Teeth |
|---|---|---|---|---|
| 5R | .0145″ .34mm |
.0425″ 1.08mm |
5″ 130mm |
16.5 tpi 6.5 tpc |
| 9R | .06″ .42mm |
.055″ 1.4mm |
5″ 130mm |
13 tpi 5.2 tpc |
| tpi = teeth per inch.tpc = teeth per centimeter. |
Not for use in power scroll saws.
Reviews
There are no reviews yet.