Jet JTM-2 Mill with NEWALL C-80 DRO and X Powerfeed Installed (691194)

Description

The Jet JTM-2 Mill with NEWALL C-80 DRO and X Powerfeed Installed (691194) is a versatile vertical milling machine designed for machinists and workshops seeking precision and efficiency. It boasts a robust Meehanite casting, ensuring stability during operation. The inclusion of a NEWALL C-80 DRO (Digital Readout) and X powerfeed enhances accuracy and streamlines your milling processes.

KEY FEATURES AND BENEFITS:

• Enhanced Accuracy: The NEWALL DRO provides precise digital measurements for accurate positioning, while the X powerfeed automates table movement for consistent results.
• Precision Engineering: The precision bored and honed milling head, along with the three-stage power downfeed with an automatic stop, guarantees accurate and repeatable cuts.
• Durable Construction: The Meehanite casting ensures the machine’s longevity and minimizes vibrations for improved surface finish.
• Smooth Operation: The large, chromed quill, high-precision spindle bearings, and internally cooled spindle head contribute to smooth and efficient operation.
• User-Friendly Design: Satin chrome finished dials and a heavy-duty splined motor drive provide ease of use and reliable power transmission.
• Enhanced Safety: The heavy-duty spindle brake ensures quick and safe stopping.
• Precision Movement: Hardened and ground ways and a precision-ground table ensure smooth, accurate movement of the table and components.
• Cooling System: The built-in coolant tank keeps your workpiece and tooling cool during extended use (coolant pump not included).

SPECIFICATIONS:

• Motor: 2 HP, 115/230V, 1 Ph, Prewired 230V
• Spindle Speeds: 8 (80 – 2720 RPM)
• Spindle Taper: R-8
• Quill Diameter: 3-3/8″
• Head Movement: 90° R & L, 45° F & B
• Max Distance Spindle to Table: 17-1/2″
• Distance Spindle to Column: 19″ (min 4-1/2″)
• Table Travel: 23-7/8″ (longitudinal), 12-1/2″ (cross)
• Collet Capacity: 1/8″ – 7/8″
• T-Slots: 3 and 5/8″, 2-1/2″ centers
• Table Size: 9″ x 42″
• Work Table Weight Capacity: 550 lbs
• Dimensions: 82″H x 57″W x 64″L

HOW TO USE:

1. Preparation: Secure your workpiece to the table using clamps or a vise. Select the appropriate cutting tool and install it in the spindle.
2. DRO Setup: Calibrate the NEWALL C-80 DRO according to the manufacturer’s instructions.
3. Powerfeed (Optional): If using the X powerfeed, set the desired feed rate and engage the powerfeed mechanism.
4. Spindle Speed Selection: Choose the appropriate spindle speed for your material and cutter using the step pulley system.
5. Cutting Operation: Carefully position the workpiece under the cutter using the table and knee controls. Lower the quill to start the cutting operation.
6. Monitoring: Monitor the DRO for accurate positioning and the cutting process for smooth operation.
7. Completion: After the cut is complete, raise the quill and disengage the powerfeed (if used). Remove the workpiece and inspect the results.

BENEFITS OF USING THE Jet JTM-2 Mill with NEWALL C-80 DRO and X Powerfeed Installed (691194):

• Increased Productivity: The X powerfeed automates table movement, increasing efficiency and reducing operator fatigue.
• Enhanced Accuracy: The NEWALL DRO ensures precise positioning, resulting in more accurate cuts and less material waste.
• Versatility: The JTM-2 can handle various milling operations, making it a valuable asset in any workshop.
• Durability: The Meehanite casting and robust construction ensure the machine will withstand years of heavy use.

FEATURES:

• Precision bored and honed milling head
• Meehanite casting
• Large diameter chromed quill
• High precision Class 7 spindle bearings
• Spindle head is internally cooled
• Satin chrome finished dials
• Heavy duty splined motor drive
• One piece quill pinion and shaft
• Heavy duty spindle brake
• Precision hardened and ground ways
• Precision ground table
• Adjustable gibs throughout
• Internal coolant tank built into base for use with coolant system (Coolant pump not included)