Jet EHB-1018VMH 10×18″ Variable Miter Saw w/ Hydraulic Vise (891080)

Description

The Jet EHB-1018VMH 10×18″ Variable Miter Saw w/ Hydraulic Vise (891080) is a high-precision, semi-automatic variable miter saw designed for efficient and accurate cutting. Built with durability and safety in mind, this saw is a valuable addition to any professional workshop.

KEY FEATURES AND BENEFITS:

• Dual Mitering: Offers precise compound angle cuts up to 60° right and 45° left.
• Variable Speed Drivetrain: Allows for optimal blade speed control for various materials.
• Hydraulic Vise: Provides quick and secure clamping of materials for safe operation.
• Semi-Automatic Bow Raise: Enhances efficiency by automatically raising the saw after cutting.
• Automatic Blade Breakage Sensor: Improves safety by stopping the saw in case of blade failure.
• Heavy-Duty Construction: Reduces vibration and ensures stability for accurate cuts.
• Built-In Chip Brush: Maintains a clean working environment by removing chips.
• ELITE Swing Away Panel: Offers convenient control access for easy operation.
• Increased Saw Bed Height: Reduces user fatigue and improves ergonomics.
• Integrated Pressurized Wash Hose: Facilitates easy cleaning and maintenance.

SPECIFICATIONS:

• Cutting Capacity (W x D): 10 x 18 inches
• Round Cutting Capacity: 10 inches at 90°, 6 inches at 60°, 10 inches at 45°
• Rectangle Cutting Capacity: 10 x 17 inches at 90°, 10 x 7 inches at 60°, 10 x 12 inches at 45°
• Square Cutting Capacity: 10 x 10 inches at 90°, 7 x 7 inches at 60°, 10 x 10 inches at 45°
• Vise Swivels: 45 degrees
• Head Movement: 60 degrees
• Blade Size: 1 x 0.035 x 144 inches
• Blade Wheel Diameter: 14 inches
• Blade Speeds: 53 – 257 SFPM
• Bed Height: 27 inches
• Motor: 2 HP, 230/460V, 3Ph
• Amperage Draw: 7 amps at 230V 3Ph, 3.5 amps at 460V 3Ph
• Overall Dimensions: 85 x 40 x 44 inches
• Weight: 1144 lbs
• Drive: Variable Speed

HOW TO USE:

1. Set Up: Place the saw on a stable, level surface. Ensure proper electrical connection.
2. Adjust Blade Height: Raise or lower the blade to match the material thickness.
3. Secure Material: Use the hydraulic vise to clamp the material firmly in place.
4. Set Cutting Angle: Adjust the miter and bevel angles as needed for your desired cut.
5. Start the Saw: Turn on the power switch and engage the blade.
6. Make the Cut: Slowly and carefully feed the material into the blade.
7. Stop the Saw: Turn off the power switch and release the blade.
8. Clean the Saw: Use the pressurized wash hose to remove chips and debris.

BENEFITS OF USING JET EHB-1018VMH 10X18″ VARIABLE MITER SAW W/ HYDRAULIC VISE (891080):

• Precise and Accurate Cuts: Professional-quality results.
• Increased Efficiency: Semi-automatic bow raise and variable speed.
• Enhanced Safety: Automatic blade breakage sensor and hydraulic vise.
• Durable Construction: Long-lasting performance.
• Comfortable Operation: Increased saw bed height.
• Easy Maintenance: Built-in chip brush and pressurized wash hose.

FEATURES:

• Dual mitering
• Variable speed drivetrain
• Hydraulic vise
• Semi-automatic bow raise
• Automatic blade breakage sensor
• Heavy-duty construction
• Built-in chip brush
• ELITE swing away panel
• Increased saw bed height
• Integrated pressurized wash hose